The benefits and costs of reducing emissions from the electricity sector

Recent federal policy proposals to reduce emissions of sulfur dioxide (SO(2)), nitrogen oxides (NO(x)), and mercury from the US electricity sector promise important improvements in air quality and reductions in acid deposition. The cost of achieving these reductions depends on the form and stringency of the regulation. In this research, we analyze the economic benefits and costs of the US Environmental Protection Agency's (EPA's) Clean Air Interstate Rule (CAIR) as characterized in the supplemental rule proposed in June 2004, and the Clean Air Mercury Rule (CAMR) as proposed in February 2004. The assessment integrates a model of the electricity sector, two models of atmospheric transport of air pollutants, and a model of environmental and public health endpoints affected by pollution. We model explicitly the emissions of SO(2), NO(x), mercury and carbon dioxide (CO(2)) and the effects of changes in emissions of SO(2) and NO(x) on environmental and public health. The manner in which mercury emissions are regulated will have important implications not only for the cost of the regulation, but also for emission levels for SO(2) and NO(x) and where those emissions are located. We find the economic benefits of CAIR and CAMR are far greater than the costs. Recent estimates of benefits of reductions in mercury and acidification indicate that our model captures the lion's share of quantifiable benefits. We also find that the EPA would have been justified on economic grounds in pursuing additional SO(2) emissions reductions beyond the requirements of CAIR.     

INVERSE SOLUTION OF HYDRAULIC DIFFUSIVITY DETERMINED BY WATER LEVEL FLUCTUATION1

ABSTRACT: This study uses the spectral analysis to inversely solve for hydraulic diffusivity of a one-dimensional aquifer with boundaries subject to non-steady state water level fluctuation. Given water level spectra obtained from observation wells and tidal gauge stations, hydraulic diffusivity of a confined aquifer in a Quaternary alluvial plain is found to be about 1.8×10⁶m^2/hr which is one order of magnitude higher than the value obtained from a local pump test performed in the same area.     

An integrated approach for identification of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) pollutant sources based on human blood contents

Background, aim, and scope  

This study developed an integrated approach to identify pollutant sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) of workers based on their blood contents.     

Isolated right diaphragmatic eventration mimicking congenital heart disease in utero

Diaphragmatic eventration is the upward displacement of the abdominal viscera secondary to a thin or paralytic diaphragm. Its clinical presentations and radiographic pictures are similar to those of diaphragmatic hernia. Prenatal diagnosis of diaphragmatic eventration is extremely rare. A pregnant woman was referred to us because of abnormal cardiac findings noted at 20 weeks of gestation. A diagnosis of partial anomalous pulmonary venous connection was made on the basis of our findings of right atrial enlargement with an abnormal vascular channel drainage to it. The infant was born via cesarean section at 40 weeks and developed complications of cyanosis immediately after birth. Postnatal imaging studies and surgical findings disclosed right side diaphragmatic eventration with liver and associated vasculature upward displacement into the right pleural cavity. The cardiac structure was otherwise normal. We conclude that when an abnormal vessel tracing and unexplainable cardiac chamber asymmetry is encountered, diaphragmatic eventration should be considered as one of the differential diagnoses. Correct recognition and transferral to the hospital for neonatal assistance may lead to timely and appropriate management of these fetuses. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of particle size of titanium dioxide nanoparticle aggregates on the degradation of one azo dye

Introduction

Titanium dioxide (TiO₂) nanoparticle powders have been extensively studied to quickly photodegrade some organic pollutants; however, the effect of the particle size of TiO₂ nanoparticle aggregates on degradation remains unclear because microscale aggregates form once the nanoparticle powders enter into water.

Methods

The degradation of azo dye by different particle sizes of TiO₂ nanoparticle aggregates controlled by NaCl concentrations was investigated to evaluate the particle size effect. Removal reactions of reactive black 5 (RB5) with TiO₂ nanoparticles followed pseudo-first-order kinetics.

Results

The increase of TiO₂ dosage from 40 to 70?mg/L enhanced the degradation. At doses around 100?mg/L TiO₂, degradation rates decreased which could be the result of poor UV light transmittance at high-particle concentrations. At average particle sizes of TiO₂ nanopowders less than around 500?nm, the degradation rates increased with decreasing particle size. As the average particle size exceeded 500?nm, the degradation rates were not significantly changed.

Conclusions

For the complete degradation experiments, the mineralization rates of total organic carbon disappearance are generally following the RB5 decolorization kinetic trend. These findings can facilitate the application of TiO₂ nanoparticles to the design of photodegradation treatments for wastewater.     

Dealing with electronic waste: modeling the costs and environmental benefits of computer monitor disposal

The importance of information technology to the world economy has brought about a surge in demand for electronic equipment. With rapid technological change, a growing fraction of the increasing stock of many types of electronics becomes obsolete each year. We model the costs and benefits of policies to manage 'e-waste' by focusing on a large component of the electronic waste stream-computer monitors-and the environmental concerns associated with disposal of the lead embodied in cathode ray tubes (CRTs) used in most monitors. We find that the benefits of avoiding health effects associated with CRT disposal appear far outweighed by the costs for a wide range of policies. For the stock of monitors disposed of in the United States in 1998, we find that policies restricting or banning some popular disposal options would increase disposal costs from about US dollar 1 per monitor to between US dollars 3 and US dollars 20 per monitor. Policies to promote a modest amount of recycling of monitor parts, including lead, can be less expensive. In all cases, however, the costs of the policies exceed the value of the avoided health effects of CRT disposal.     

A phytoremediation study: Selection of tropical and other vascular plants for decolorization of Poly R‐478 dye

Peroxidases and other lignin‐degrading enzymes and chemicals can potentially degrade persistent pollutants. Fifty vascular plant species were hydroponically tested for the capability of decolorization of Poly R‐478, a lignolytic indicator dye. The top six species that had less than 50 percent of control color at the end of the experiments were Pennisetum purpureum, Rumex crispus, Fimbristylis cymosa, Eleocharis calva, Hibiscus furcellatus, and Cyperus javanicus, in an order from high to low decolorization activity. F. cymosa, E. calva, and C. javanicus are in the Cyperaceae family. Extracellular peroxidase activity was found in vascular plants and correlated to decolorization of polymeric dyes. The plant R. crispus provided the highest guaiacol peroxidase enzyme activity among four of the top six plant species. The Poly R‐478 decolorization could be used as a fast screening technique for vascular plants that may have phytoremediation capability. © 2006 Wiley Periodicals, Inc.     

Nickel ferrite nanoenabled graphene oxide (NiFe2O4@GO) as photoactive nanocomposites for water treatment

Environmental Science and Pollution Research - Nanocomposite materials can enhance the capabilities of water treatment processes such as photocatalysis. In this work, novel light-driven...     

Copper stabilization in beneficial use of waterworks sludge and copper-laden electroplating sludge for ceramic materials

A promising strategy for effectively incorporating metal-containing waste materials into a variety of ceramic products was devised in this study. Elemental analysis confirmed that copper was the predominant metal component in the collected electroplating sludge, and aluminum was the predominant constituent of waterworks sludge collected in Hong Kong. The use of waterworks sludge as an aluminum-rich precursor material to facilitate copper stabilization under thermal conditions provides a promising waste-to-resource strategy. When sintering the mixture of copper sludge and the 900 °C calcined waterworks sludge, the CuAl₂O₄ spinel phase was first detected at 650 °C and became the predominant product phase at temperatures higher than 850 °C. Quantification of the XRD pattern using the Rietveld refinement method revealed that the weight of the CuAl₂O₄ spinel phase reached over 50% at 850 °C. The strong signals of the CuAl₂O₄ phase continued until the temperature reached 1150 °C, and further sintering initiated the generation of the other copper-hosting phases (CuAlO₂, Cu₂O, and CuO). The copper stabilization effect was evaluated by the copper leachability of the CuAl₂O₄ and CuO via the prolonged leaching experiments at a pH value of 4.9. The leaching results showed that the CuAl₂O₄ phase was superior to the CuAlO₂ and CuO phases for immobilizing hazardous copper over longer leaching periods. The findings clearly indicate that spinel formation is the most crucial metal stabilization mechanism when sintering multiphase copper sludge with aluminum-rich waterworks sludge, and suggest a promising and reliable technique for reusing both types of sludge waste for ceramic materials.